Wet mix mortar

Cement, fine aggregates, admixtures, water and various components determined according to their properties, in a certain proportion, after being measured and mixed in the mixing station, are transported to the place of use by a mixer truck, put into special containers for storage, and Wet mixes that are used up within the specified time
R
The ready-mixed wet-mixed mortar is used for the tensile bonding test, and the mortar on the specimen quickly falls off. What's the matter?
Replies
4
Views
5
Luis
L
S
Pay attention to ready-mixed Wet-mixed Mortar
Replies
4
Views
5
Rony
Rony
Alex
How long does the mixer usually stir the wet-mixed mortar? I stirred for 30s, and the bulk density was 1750. After stirring for 60s, the bulk density
Replies
5
Views
6
Rony
Rony
J
The ready-mixed wet-mixed mortar is used for the tensile bonding test, and the mortar on the specimen quickly falls off. What's the matter?
Replies
2
Views
3
Rony
Rony
A
Why does ordinary plaster mortar crack?
Replies
6
Views
7
Alex
Alex
S
The mortar quickly falls off after being applied to the wall, and it takes a long time to harden.
Replies
6
Views
7
Scott Kaplan
S
A
Plastering mortar wall bubbling, what is wrong?
Replies
6
Views
7
Roy
R
L
Mortar admixtures have poor plasticity, which causes mortar hardly maintains its optimum state. Who can give me some directions about this?
Replies
6
Views
7
Johnson
J
A
How long does it take to mix wet mortar with a mixer?
Replies
5
Views
6
Allen
A
L
The problem with wet-mixed mortar is that it falls off quickly after being put on the wall and takes a long time to harden.
Replies
6
Views
7
Shamil
S
S
What happens when plastering mortar walls appear beads?
Replies
8
Views
9
Shamil
S
R
Wet-mixed mortar retarding time
Replies
7
Views
8
Shamil
S
Alex
the question about sharp sand for wet-mixed mortar
Replies
6
Views
7
Rony
Rony
You must log in or register to post here.
Back
Top