wet-mixed mortar

The compressive strength is the same, and applying on the wall is fine, but only the mortar on most of the test pieces is easy to fall off under the normal maintenance condition, and the 14d will fall off with a slight break. I am still determining the specific reason.

The compressive strength is the same, and applying on the wall is fine, but only the mortar on most of the test pieces is easy to fall off under the normal maintenance condition, and the 14d will fall off with a slight break. I am still determining the specific reason.

Now the growth of wet-mixed mortar has dramatically surpassed dry-mixed mortar. Compared with dry-mixed mortar, wet-mixed mortar can reduce drying, dust removal, and on-site vertical tanks. The commercial concrete mixing station has excess capacity and can be put into production after proper...

How long does the mixer usually stir the wet-mixed mortar? I stirred for 30s, and the bulk density was 1750. After stirring for 60s, the bulk density was only 1400. How is this going? Who can help me out?

The products produced could have been more satisfactory since we launched the wet-mixed mortar project last year. The powder additives can’t make the mortar smooth, and it is not easy to dry after being applied to the wall. The inner wall is thinner and not very flaky, and the outer wall is...

Plastering mortar wall bubbling, what is wrong?

Mortar admixtures have poor plasticity, which causes mortar hardly maintains its optimum state. Who can give me some directions about this? When the machine has just finished mixing, the overall condition of the mortar looks good. After standing for 2 hours, the mortar began to loosen. I...

How long does it take to mix wet mortar with a mixer? I stirred for 30 seconds, and the bulk density was 1750. After starting for 60 seconds, the bulk density was only 1400. How is this going?

Wet-mixed mortar is good for anything; that is, the retarding effect is only 25 or 26 hours, and what retarder can be added to extend a more prolonged time over 30 hours?

Since the company started the wet-mix mortar project last year, its products have not been very satisfactory. It uses powder additives, and the mortar is not very smooth. It is not easy to dry after being applied to the wall. The interior wall can barely be constructed, but the exterior wall is...

What happens when plastering mortar walls appear beads?

A wet-mixed mortar liquid plasticizer is easy to bleed when used with sharp sand, and the bubbles are lost quickly, making it difficult to maintain the state. It is challenging to solve this problem when only considering plasticizers. The initial state can be adjusted to improve, but the loss is...